lnmp一键安装时候报错

jiuwen

Note that yum will try to contact the repo. when it runs most commands,
        so will have to try and fail each time (and thus. yum will be be much
        slower). If it is a very temporary problem though, this is often a nice
        compromise:

            yum-config-manager --save --setopt=epel.skip_if_unavailable=true

failure: repodata/repomd.xml from epel: [Errno 256] No more mirrors to try.
http://mirrors.tencentyun.com/epel/7/x86_64/repodata/repomd.xml: [Errno 14] curl#6 - "Could not resolve host: mirrors.tencentyun.com; 没有与主机名关联的地址"
已加载插件：fastestmirror, langpacks
http://mirrors.tencentyun.com/epel/7/x86_64/repodata/repomd.xml: [Errno 14] curl#6 - "Could not resolve host: mirrors.tencentyun.com; 没有与主机名关联的地址"
正在尝试其它镜像。


One of the configured repositories failed (EPEL for redhat/centos 7 - x86_64),
and yum doesn't have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work "fix" this:

     1. Contact the upstream for the repository and get them to fix the problem.

     2. Reconfigure the baseurl/etc. for the repository, to point to a working
        upstream. This is most often useful if you are using a newer
        distribution release than is supported by the repository (and the
        packages for the previous distribution release still work).

     3. Disable the repository, so yum won't use it by default. Yum will then
        just ignore the repository until you permanently enable it again or use
        --enablerepo for temporary usage:

            yum-config-manager --disable epel

     4. Configure the failing repository to be skipped, if it is unavailable.
        Note that yum will try to contact the repo. when it runs most commands,
        so will have to try and fail each time (and thus. yum will be be much
        slower). If it is a very temporary problem though, this is often a nice
        compromise:

            yum-config-manager --save --setopt=epel.skip_if_unavailable=true

failure: repodata/repomd.xml from epel: [Errno 256] No more mirrors to try.
http://mirrors.tencentyun.com/epel/7/x86_64/repodata/repomd.xml: [Errno 14] curl#6 - "Could not resolve host: mirrors.tencentyun.com; 没有与主机名关联的地址"
已加载插件：fastestmirror, langpacks
http://mirrors.tencentyun.com/epel/7/x86_64/repodata/repomd.xml: [Errno 14] curl#6 - "Could not resolve host: mirrors.tencentyun.com; 没有与主机名关联的地址"
正在尝试其它镜像。


One of the configured repositories failed (EPEL for redhat/centos 7 - x86_64),
and yum doesn't have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work "fix" this:

     1. Contact the upstream for the repository and get them to fix the problem.

     2. Reconfigure the baseurl/etc. for the repository, to point to a working
        upstream. This is most often useful if you are using a newer
        distribution release than is supported by the repository (and the
        packages for the previous distribution release still work).

     3. Disable the repository, so yum won't use it by default. Yum will then
        just ignore the repository until you permanently enable it again or use
        --enablerepo for temporary usage:

            yum-config-manager --disable epel

     4. Configure the failing repository to be skipped, if it is unavailable.
        Note that yum will try to contact the repo. when it runs most commands,
        so will have to try and fail each time (and thus. yum will be be much
        slower). If it is a very temporary problem though, this is often a nice
        compromise:

            yum-config-manager --save --setopt=epel.skip_if_unavailable=true

failure: repodata/repomd.xml from epel: [Errno 256] No more mirrors to try.
http://mirrors.tencentyun.com/epel/7/x86_64/repodata/repomd.xml: [Errno 14] curl#6 - "Could not resolve host: mirrors.tencentyun.com; 没有与主机名关联的地址"
已加载插件：fastestmirror, langpacks

licess

地址无法解析，更换为其他源

jiuwen

麻烦 请问一下怎么解决   下的完整版   无法解析 怎么改还是怎么

licess

1.3的话会自动设置，你这个可能是源的问题，自己去换源参考：http://mirrors.163.com/.help/centos.html