lnmp安装失败但是没找到具体的原因，请大佬帮帮忙看看

一岁呀 · 发表于 2022-2-23 16:07:45

具体内容如附件，安装的是lnmp环境。

文件我上传到附件里面了，还请大佬们帮忙看看问题。

发帖如果不规范的地方还请指教。

锦帆君 · 发表于 2022-2-23 19:49:35

yum源404了，换源后再试一下

licess · 发表于 2022-2-23 20:29:07

Loading mirror speeds from cached hostfile
http://yum.tbsite.net/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] HTTP Error 404 - Not Found
Trying other mirror.
To address this issue please refer to the below wiki article

https://wiki.centos.org/yum-errors

If above article doesn't help to resolve this issue please use https://bugs.centos.org/.

One of the configured repositories failed (CentOS-7),
and yum doesn't have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work "fix" this:

   1. Contact the upstream for the repository and get them to fix the problem.

   2. Reconfigure the baseurl/etc. for the repository, to point to a working
      upstream. This is most often useful if you are using a newer
      distribution release than is supported by the repository (and the
      packages for the previous distribution release still work).

   3. Run the command with the repository temporarily disabled
         yum --disablerepo=base ...

   4. Disable the repository permanently, so yum won't use it by default. Yum
      will then just ignore the repository until you permanently enable it
      again or use --enablerepo for temporary usage:

         yum-config-manager --disable base
      or
         subscription-manager repos --disable=base

   5. Configure the failing repository to be skipped, if it is unavailable.
      Note that yum will try to contact the repo. when it runs most commands,
      so will have to try and fail each time (and thus. yum will be be much
      slower). If it is a very temporary problem though, this is often a nice
      compromise:

         yum-config-manager --save --setopt=base.skip_if_unavailable=true

failure: repodata/repomd.xml from base: [Errno 256] No more mirrors to try.
http://yum.tbsite.net/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] HTTP Error 404 - Not Found

系统源没设置正确是无法安装的，如何设置可以论坛搜索：CentOS更换源

一岁呀 · 发表于 2022-2-24 09:36:11

licess 发表于 2022-2-23 20:29
系统源没设置正确是无法安装的，如何设置可以论坛搜索：CentOS更换源

做了本地源后不知道为啥还是出错了，昨天还特地用自己电脑的虚拟机下掉网卡做离线安装，相同系统Centos7.6.1810的虚拟机下掉网卡做离线安装就可以，但是用服务器的就不行。附件我重新上传一个了

一岁呀 · 发表于 2022-2-24 09:37:17

这个是第二次用了本地源后的附件

一岁呀 · 发表于 2022-2-24 09:38:34

锦帆君发表于 2022-2-23 19:49
yum源404了，换源后再试一下

第二次换了本地源了还是不行，虚拟机下掉网卡离线安装就可以

一岁呀 · 发表于 2022-2-24 10:02:33

这些是一些相关的内容，还请大佬们帮忙看看具体原因是什么，辛苦大佬们了

[root@wy19twks ~]# ll /etc/yum.repos.d/
total 20
-rw-r--r-- 1 root root 577 Jan 19 09:03 base.repo.bak
-rw-r--r-- 1 root root 603 Jan 14 16:03 CentOS-Base.repo.bak
-rw-r--r-- 1 root root 137 Feb 24 08:54 CentOS-Media.repo
-rw-r--r-- 1 root root 206 Jan 14 16:04 epel.repo.bak

[root@wy19twks ~]# cat /etc/yum.repos.d/CentOS-Media.repo
[local-media]

name=CentOS-$releasever - Media
baseurl=file:///mnt/dvd/
gpgcheck=1
enabled=1
gpgkey=file:///mnt/dvd/RPM-GPG-KEY-CentOS-7

[root@wy19twks ~]# ll /mnt/dvd/
total 686
-rw-rw-r-- 1 root root    14 Nov 26  2018 CentOS_BuildTag
drwxr-xr-x 3 root root 2048 Nov 26  2018 EFI
-rw-rw-r-- 1 root root 227 Aug 30  2017 EULA
-rw-rw-r-- 1 root root  18009 Dec 10  2015 GPL
drwxr-xr-x 3 root root 2048 Nov 26  2018 images
drwxr-xr-x 2 root root 2048 Nov 26  2018 isolinux
drwxr-xr-x 2 root root 2048 Nov 26  2018 LiveOS
drwxrwxr-x 2 root root 663552 Nov 26  2018 Packages
drwxrwxr-x 2 root root 4096 Nov 26  2018 repodata
-rw-rw-r-- 1 root root 1690 Dec 10  2015 RPM-GPG-KEY-CentOS-7
-rw-rw-r-- 1 root root 1690 Dec 10  2015 RPM-GPG-KEY-CentOS-Testing-7
-r--r--r-- 1 root root 2883 Nov 26  2018 TRANS.TBL

[root@wy19twks ~]# ll /home/ | grep Cent
-rw-r--r-- 1 root root 4588568576 Feb 24 09:04 CentOS-7-x86_64-DVD-1810.iso

licess · 发表于 2022-2-24 12:08:32

一岁呀发表于 2022-2-24 09:37
这个是第二次用了本地源后的附件

Loading mirror speeds from cached hostfile
Resolving Dependencies
--> Running transaction check
---> Package krb5-devel.x86_64 0:1.15.1-34.el7 will be installed
--> Processing Dependency: libkadm5(x86-64) = 1.15.1-34.el7 for package: krb5-devel-1.15.1-34.el7.x86_64
--> Processing Dependency: krb5-libs(x86-64) = 1.15.1-34.el7 for package: krb5-devel-1.15.1-34.el7.x86_64
--> Processing Dependency: libverto-devel for package: krb5-devel-1.15.1-34.el7.x86_64
--> Processing Dependency: libselinux-devel for package: krb5-devel-1.15.1-34.el7.x86_64
--> Processing Dependency: keyutils-libs-devel for package: krb5-devel-1.15.1-34.el7.x86_64
--> Running transaction check
---> Package keyutils-libs-devel.x86_64 0:1.5.8-3.el7 will be installed
---> Package krb5-devel.x86_64 0:1.15.1-34.el7 will be installed
--> Processing Dependency: krb5-libs(x86-64) = 1.15.1-34.el7 for package: krb5-devel-1.15.1-34.el7.x86_64
---> Package libkadm5.x86_64 0:1.15.1-34.el7 will be installed
--> Processing Dependency: krb5-libs(x86-64) = 1.15.1-34.el7 for package: libkadm5-1.15.1-34.el7.x86_64
---> Package libselinux-devel.x86_64 0:2.5-14.1.el7 will be installed
--> Processing Dependency: libsepol-devel(x86-64) >= 2.5-10 for package: libselinux-devel-2.5-14.1.el7.x86_64
--> Processing Dependency: pkgconfig(libsepol) for package: libselinux-devel-2.5-14.1.el7.x86_64
--> Processing Dependency: pkgconfig(libpcre) for package: libselinux-devel-2.5-14.1.el7.x86_64
---> Package libverto-devel.x86_64 0:0.2.5-4.el7 will be installed
--> Running transaction check
---> Package krb5-devel.x86_64 0:1.15.1-34.el7 will be installed
--> Processing Dependency: krb5-libs(x86-64) = 1.15.1-34.el7 for package: krb5-devel-1.15.1-34.el7.x86_64
---> Package libkadm5.x86_64 0:1.15.1-34.el7 will be installed
--> Processing Dependency: krb5-libs(x86-64) = 1.15.1-34.el7 for package: libkadm5-1.15.1-34.el7.x86_64
---> Package libsepol-devel.x86_64 0:2.5-10.el7 will be installed
---> Package pcre-devel.x86_64 0:8.32-17.el7 will be installed
--> Finished Dependency Resolution
Error: Package: libkadm5-1.15.1-34.el7.x86_64 (local-media)
         Requires: krb5-libs(x86-64) = 1.15.1-34.el7
         Installed: krb5-libs-1.15.1-37.el7_6.x86_64 (@updates)
            krb5-libs(x86-64) = 1.15.1-37.el7_6
         Available: krb5-libs-1.15.1-34.el7.x86_64 (local-media)
            krb5-libs(x86-64) = 1.15.1-34.el7
Error: Package: krb5-devel-1.15.1-34.el7.x86_64 (local-media)
         Requires: krb5-libs(x86-64) = 1.15.1-34.el7
         Installed: krb5-libs-1.15.1-37.el7_6.x86_64 (@updates)
            krb5-libs(x86-64) = 1.15.1-37.el7_6
         Available: krb5-libs-1.15.1-34.el7.x86_64 (local-media)
            krb5-libs(x86-64) = 1.15.1-34.el7
You could try using --skip-broken to work around the problem
You could try running: rpm -Va --nofiles --nodigest
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Package libidn-1.28-4.el7.x86_64 already installed and latest version
Nothing to do
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
No package libidn-devel available.
Error: Nothing to do
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Package matching 1:openssl-1.0.2k-16.el7.x86_64 already installed. Checking for update.
Nothing to do
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Resolving Dependencies
--> Running transaction check
---> Package openssl-devel.x86_64 1:1.0.2k-16.el7 will be installed
--> Processing Dependency: openssl-libs(x86-64) = 1:1.0.2k-16.el7 for package: 1:openssl-devel-1.0.2k-16.el7.x86_64
--> Processing Dependency: krb5-devel(x86-64) for package: 1:openssl-devel-1.0.2k-16.el7.x86_64
--> Running transaction check
---> Package krb5-devel.x86_64 0:1.15.1-34.el7 will be installed
--> Processing Dependency: libkadm5(x86-64) = 1.15.1-34.el7 for package: krb5-devel-1.15.1-34.el7.x86_64
--> Processing Dependency: krb5-libs(x86-64) = 1.15.1-34.el7 for package: krb5-devel-1.15.1-34.el7.x86_64
--> Processing Dependency: libverto-devel for package: krb5-devel-1.15.1-34.el7.x86_64
--> Processing Dependency: libselinux-devel for package: krb5-devel-1.15.1-34.el7.x86_64
--> Processing Dependency: keyutils-libs-devel for package: krb5-devel-1.15.1-34.el7.x86_64
---> Package openssl-devel.x86_64 1:1.0.2k-16.el7 will be installed
--> Processing Dependency: openssl-libs(x86-64) = 1:1.0.2k-16.el7 for package: 1:openssl-devel-1.0.2k-16.el7.x86_64
--> Running transaction check
---> Package keyutils-libs-devel.x86_64 0:1.5.8-3.el7 will be installed
---> Package krb5-devel.x86_64 0:1.15.1-34.el7 will be installed
--> Processing Dependency: krb5-libs(x86-64) = 1.15.1-34.el7 for package: krb5-devel-1.15.1-34.el7.x86_64
---> Package libkadm5.x86_64 0:1.15.1-34.el7 will be installed
--> Processing Dependency: krb5-libs(x86-64) = 1.15.1-34.el7 for package: libkadm5-1.15.1-34.el7.x86_64
---> Package libselinux-devel.x86_64 0:2.5-14.1.el7 will be installed
--> Processing Dependency: libsepol-devel(x86-64) >= 2.5-10 for package: libselinux-devel-2.5-14.1.el7.x86_64
--> Processing Dependency: pkgconfig(libsepol) for package: libselinux-devel-2.5-14.1.el7.x86_64
--> Processing Dependency: pkgconfig(libpcre) for package: libselinux-devel-2.5-14.1.el7.x86_64
---> Package libverto-devel.x86_64 0:0.2.5-4.el7 will be installed
---> Package openssl-devel.x86_64 1:1.0.2k-16.el7 will be installed
--> Processing Dependency: openssl-libs(x86-64) = 1:1.0.2k-16.el7 for package: 1:openssl-devel-1.0.2k-16.el7.x86_64
--> Running transaction check
---> Package krb5-devel.x86_64 0:1.15.1-34.el7 will be installed
--> Processing Dependency: krb5-libs(x86-64) = 1.15.1-34.el7 for package: krb5-devel-1.15.1-34.el7.x86_64
---> Package libkadm5.x86_64 0:1.15.1-34.el7 will be installed
--> Processing Dependency: krb5-libs(x86-64) = 1.15.1-34.el7 for package: libkadm5-1.15.1-34.el7.x86_64
---> Package libsepol-devel.x86_64 0:2.5-10.el7 will be installed
---> Package openssl-devel.x86_64 1:1.0.2k-16.el7 will be installed
--> Processing Dependency: openssl-libs(x86-64) = 1:1.0.2k-16.el7 for package: 1:openssl-devel-1.0.2k-16.el7.x86_64
---> Package pcre-devel.x86_64 0:8.32-17.el7 will be installed
--> Finished Dependency Resolution
Error: Package: 1:openssl-devel-1.0.2k-16.el7.x86_64 (local-media)
         Requires: openssl-libs(x86-64) = 1:1.0.2k-16.el7
         Installed: 1:openssl-libs-1.0.2k-16.el7_6.1.x86_64 (@updates)
            openssl-libs(x86-64) = 1:1.0.2k-16.el7_6.1
         Available: 1:openssl-libs-1.0.2k-16.el7.x86_64 (local-media)
            openssl-libs(x86-64) = 1:1.0.2k-16.el7
Error: Package: libkadm5-1.15.1-34.el7.x86_64 (local-media)
         Requires: krb5-libs(x86-64) = 1.15.1-34.el7
         Installed: krb5-libs-1.15.1-37.el7_6.x86_64 (@updates)
            krb5-libs(x86-64) = 1.15.1-37.el7_6
         Available: krb5-libs-1.15.1-34.el7.x86_64 (local-media)
            krb5-libs(x86-64) = 1.15.1-34.el7
Error: Package: krb5-devel-1.15.1-34.el7.x86_64 (local-media)
         Requires: krb5-libs(x86-64) = 1.15.1-34.el7
         Installed: krb5-libs-1.15.1-37.el7_6.x86_64 (@updates)
            krb5-libs(x86-64) = 1.15.1-37.el7_6
         Available: krb5-libs-1.15.1-34.el7.x86_64 (local-media)
            krb5-libs(x86-64) = 1.15.1-34.el7
You could try using --skip-broken to work around the problem
You could try running: rpm -Va --nofiles --nodigest

可以尝试执行
yum clean all
yum distro-sync
后再尝试执行
yum install openssl-devel 看是否可以正常安装，如果可以正常安装就可以重新安装lnmp

一岁呀 · 发表于 2022-2-24 15:16:00

licess 发表于 2022-2-24 12:08
可以尝试执行
yum clean all
yum distro-sync

厉害啊，执行了这两个后lnmp环境就安装成功啦，谢谢大佬帮忙

那我理解应该就是没装 openssl-devel 这个依赖包了

不过下面这里出错是不是主要用在在线安装的情况下的呢，我看它尝试去那个 soft.vpser.net (soft.vpser.net)... 81.70.180.148 节点，但是失败了。

[PEAR] XML_Util    - installed: 1.4.5
warning: pear/PEAR dependency package "pear/Archive_Tar" installed version 1.4.9 is not the recommended version 1.4.4
[PEAR] PEAR          - installed: 1.10.12
Wrote PEAR system config file at: /usr/local/php/etc/pear.conf
You may want to add: /usr/local/php/lib/php to your php.ini include_path
/home/lnmp1.7-full/src/php-7.3.23/build/shtool install -c ext/phar/phar.phar /usr/local/php/bin
ln -s -f phar.phar /usr/local/php/bin/phar
Installing PDO headers:          /usr/local/php/include/php/ext/pdo/
Copy new php configure file...
Modify php.ini......
config-set succeeded
config-set succeeded
Downloading Composer...
--2022-02-24 14:56:10--  https://soft.vpser.net/web/php/composer/composer.phar
Resolving soft.vpser.net (soft.vpser.net)... 81.70.180.148
Connecting to soft.vpser.net (soft.vpser.net)|81.70.180.148|:443... failed: Connection timed out.
Retrying.

--2022-02-24 14:58:11--  (try: 2)  https://soft.vpser.net/web/php/composer/composer.phar
Connecting to soft.vpser.net (soft.vpser.net)|81.70.180.148|:443... failed: Connection timed out.
Retrying.

--2022-02-24 15:00:13--  (try: 3)  https://soft.vpser.net/web/php/composer/composer.phar
Connecting to soft.vpser.net (soft.vpser.net)|81.70.180.148|:443... ^[[Bfailed: Connection timed out.
Giving up.

Composer install failed, try to from composer official website...

licess · 发表于 2022-2-24 18:26:24

一岁呀发表于 2022-2-24 15:16
厉害啊，执行了这两个后lnmp环境就安装成功啦，谢谢大佬帮忙

那我理解应该就是没装 openssl-devel 这个 ...

composer使用的话需要联网环境，内网环境无法下载是正常的

一岁呀 · 发表于 2022-2-25 10:00:13

licess 发表于 2022-2-24 18:26
composer使用的话需要联网环境，内网环境无法下载是正常的

难怪我装的时候这里等了很久，但是最后是成功了，就很神奇。

		自动登录	找回密码
密码			注册

lnmp安装失败但是没找到具体的原因，请大佬帮帮忙看看

本帖子中包含更多资源

本帖子中包含更多资源

军哥运维代购：http://shop63846532.taobao.com/